Q26 Special surfacings / pavings for sport / general amenity
IMPACT ABSORBING SURFACINGS FOR PLAY AREAS:
300 EXTENT OF IMPACT ABSORBING SURFACING
General: Lay to the impact areas shown in the relevant parts of BS EN 1176 to 1177:2008.
IN SITU SYNTHETIC SURFACING Sub Base: Granular sub base as section Q20 (MOT Type 1 classification) – applies to Abacus at 40mm thickness or more.
Surface course: Wetpour in-situ-laid resin-bound rubber crumb surface to BS 7188:1998 and to BS EN 1177:2008 constructed in a two-layer make-up as follows:
Base course: 18mm-20mm granules (SBR) mixed with polyurethane resin screeded level and laid to varying depths in accordance with required critical fall height of equipment (Not applicable to 20 mm surfacing).
Wearing course: 15mm (EPDM rubber granules) mixed with polyurethane resin screeded level in various colours and inlaid graphics.
Manufacturer: Abacus Playgrounds Limited, 11/30 The Creek, Northfleet, Kent, DA11 9AS
Telephone: +44 01474 532277
Product reference: Abacus wet pour mm.
Colour: Full colour TPV Abacus surfacing.
Health and safety: Surfaces must not contain any substance known to be toxic or carcinogenic when in contact with the skin, or released as vapour or dust during normal use.
m Critical fall height when tested to BS EN 1177:2008
Submit: Evidence of testing to BS 7188 for resistance to abrasive wear, slip resistance, resistance to indentation and ease of ignition, and to BS EN 1177:2008 for critical fall height.
Bill of Quantities for Wetpour Safety Surfacing
|Quantity||Unit||Rate (£)||Total (£)|
|A||Q26 SPECIAL SURFACINGS/PAVINGS FOR SPORT||m2|
|Abacus Impact Absorbing Wetpour Rubber Safety surfacing; designed for a critical fall height of m manufactured by Abacus Playgrounds Limited, 11/30 The Creek, Northfleet, Kent, DA11 9AS [Telephone: 0800 5870290].|
|To be supplied and laid strictly in accordance with the manufacturer’s instructions; general layout and detail as drawing reference: – Spec. Q26.|
|Play surfacing: mm thick surfacing to falls and cross falls and to slopes; on and including associated sub base formation under; to meet requirements of BS EN 1176 & BS EN 1177:2008, all surfacing conforming to BS 7188:1998.|
|Colour: Full colour TPV Abacus surfacing.|